Separate into 6 mono WAVs using Tranzcode
(back)

Needed software:
(latest version may be found at:  http://tranzcode.byethost22.com/, needfullthings.webhop.org, Forum)

• Tranzcode [mirror with description]
  Tranzcode separates multichannel WAV/DTS/DTSWAV into separate mono Wave files for every channel

Steps to separate into 6 mono WAVs:

1. start TranzcodeGUI (or use commandline, see description of author for that)
2. Insert ".DTS" or DTSWAV-Datei ".WAV" (or multichanel WAV)
3. click "run"
    
   
    
4. You'll get 6 mono wave files.
   These may be used for further processing.

• Hint:

  Tranzcode as of version 0.4 allows direct resampling/dithering/bit depth conversion - which is still not supported by the GUI. Dithering: /Dx (x=0-3) use if you convert to a lower bit depth (e.g. 64f/32f/32/24 Bit -> 16 Bit) 1 = Noise Shaping 2 = Triangular Dither 3 = ATH Based Noise Shaping Bit depth: /64f = 64 Bit Floating Point /32f = 32 Bit Floating point /32 = 32 Bit /16 = 16 Bit /8 = 8 Bit Resampling: 96 Khz, 48 KHz, 44.1 KHz /44100 = 44.1 kHz output /48000 = 48 kHz output /96000 = 96 kHz outpute   Commandline example: WAV to: 16 Bits/44KHz with dithering tranzcode multichannel.wav /16 /d2 /44100

(back)